英语翻译Attaching the fiber assembly to the holder 1Unscrew the black cylinder-like depth gauge of the holder 2 Unscrew the threaded end-cap on the end of the holder 3 push the black plunger forward through the Z-slot on the base of the holder to
来源:学生作业帮助网 编辑:作业帮 时间:2024/07/06 20:39:25
![英语翻译Attaching the fiber assembly to the holder 1Unscrew the black cylinder-like depth gauge of the holder 2 Unscrew the threaded end-cap on the end of the holder 3 push the black plunger forward through the Z-slot on the base of the holder to](/uploads/image/z/8180777-65-7.jpg?t=%E8%8B%B1%E8%AF%AD%E7%BF%BB%E8%AF%91Attaching+the+fiber+assembly+to+the+holder+1Unscrew+the+black+cylinder-like+depth+gauge+of+the+holder+2+Unscrew+the+threaded+end-cap+on+the+end+of+the+holder+3+push+the+black+plunger+forward+through+the+Z-slot+on+the+base+of+the+holder+to)
英语翻译Attaching the fiber assembly to the holder 1Unscrew the black cylinder-like depth gauge of the holder 2 Unscrew the threaded end-cap on the end of the holder 3 push the black plunger forward through the Z-slot on the base of the holder to
英语翻译
Attaching the fiber assembly to the holder 1Unscrew the black cylinder-like depth gauge of the holder 2 Unscrew the threaded end-cap on the end of the holder 3 push the black plunger forward through the Z-slot on the base of the holder to expose the end of the plunger .Not internal threads inside of the plunger will accept the threaded fiber assembly 4 screw the fiber assembly into the end of the plunger 5 retract the plunger by pulling it back through the Z-slot and slide the threaded end-cap over the needle .screw the threaded end-cap tightly onto the end of holder 6 screw the black depth depth gauge onto the end of the holder over the threaded end-cap
英语翻译Attaching the fiber assembly to the holder 1Unscrew the black cylinder-like depth gauge of the holder 2 Unscrew the threaded end-cap on the end of the holder 3 push the black plunger forward through the Z-slot on the base of the holder to
将光纤组件与固定器组合
1,旋松固定器的黑色汽缸状深规;
2,旋松固定器底端的线状端盖;
3,将固定器基座的黑色活塞前推过Z型槽,打开活塞底部;活塞的内螺丝不可与线状光纤连接.
4,将光纤组件旋至活塞底部;
5,将活塞后拉,缩回Z型槽,将线状端盖滑过指针,将线状端盖与固定器底端通过螺丝紧固;
6,将黑色深规螺丝通过线状端盖固定至固定器底部.